Ideal For Large Volumes Of Water
The P5200WP-40 is one of the lightest and most portable 2-Stroke engine driven pumps ideal for handling large volumes of water.
Weighing only 9.8kg it’s easy to move and store making it ideal for most domestic and professional applications such as transferring clean or fresh water from wells, ponds, pools, ditches, hot tubs, flooded areas and also irrigation.
Powered by a 2-stroke easy start Hyundai 52cc petrol engine with excellent fuel consumption and strong performance.
Built To Last
The pump uses high quality ceramic mechanical sealing, crucial to any clean water pump. Housed in a strong steel frame that protects against accidental damage and the carry handle allows for easy transportation.
Strong And Reliable Performance
The P5200WP has been designed to give reliable performance and capable of transferring 85L/min and has a 38mm / 1.5″ inlet and outlet. The pump body is made of light-weight but extremely strong aluminium alloy. The pump has a total head of 14m and a maximum suction head of 8m. Please see the diagram below explains the different meanings of head when used in reference to a water pump. The ‘head’ is also referred to as ‘lift’ by some manufacturers.
Housed within a rugged open frame, with a convenient carry handle, it’s easy to move and store but this frame also provides protection from potential damage to the pump and engine itself.
Before using your petrol water pump, make sure you have your suction hose and lay flat hose ready. The suction hose is used between the water source you are looking to move and the pump, and is more sturdy and strengthened to stop it being ‘sucked’ flat while in use. The lay flat hose is used on the outlet of the pump and usually sits ‘flat’ – hence the name. Try to use the minimum amount of suction hose possible and place the pump as close to the water as you can.
Simply attach the strainer (the plastic ‘cage’ included with the pump), to the end of the suction hose, which prevents debris being sucked into the pump and causing damage to the impeller. Then, using the provided collars, attach the other end of the suction hose to the inlet on the pump. Use the other collar to attach your lay flat hose and run it to then are you want the water to be discharged to.
This pump is self-priming, however, in order to create a vacuum and start the lifting process you need to fill the pump housing with water. You can do this by removing the cap on the top of the pump casing and filling with fresh water, then simply follow the starting procedure in the manual to begin pumping. Ensure that there are no air leaks on the suction side, as this will prevent the pump from priming.
Lightweight And Compact
Its lightweight construction and compact design allow the P5200WP-40 petrol water pump to be stored in a garden shed, garage or van for portable use. Its simple construction allows easy operation, maintenance and cleaning.
In The Box:
- P5200WP-40 water pump
- Hose fitting kit,
- Suction filter
- Tool kit
Covered by P1PE 2 year warranty.